Micro Digital Satellite Receiver Guia de Instalação descarregar pdf (Página 22)

B. Gohl © GEOSATpro

A basic connection for standard definition SD TV viewing is to connect the to the

TV with the included AV cable. Place the 1/8th inch plug into the receiver’s AV

Out port and connect the yellow/white/red RCA plugs to the TV’s AV IN jacks.

To view high definition video in HD, connect a HDMI cable between the receiver

and TV.

Connect a short RG6 coax cable from the LNBF on the satellite

dish to the SAT IN port on the rear panel of the microHD.

Plug the television power plug into a surge protected AC

power strip. Turn the TV power ON and set the TV to the AV

input. The TV is now ready to view the satellite receiver.

Plug the satellite receiver’s power supply into the 12VDC

port on the rear panel of the microHD. Plug the microHD

power supply AC plug into the surge protected power strip.

Older TV: Only Antenna Jack

Consult the owners manual provided with TV, VCR or other device that will

be connected to the GEOSATpro satellite receiver. Questions regarding the

connection to any other equipment should be directed to the manufacturer of that

device.

Standard Definition Connections (opt.)

VCR - Standard Definition

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 72 73

Sem comentários

Micro Digital Satellite Receiver Guia de Instalação Página 22